BBLTL - MCP-788 PERMAGRAPHIC ACTIVATOR
- MSDS: BBLTL
- Manufacturer: BAYER CORP AGFA DIV
- Product Name: MCP-788 PERMAGRAPHIC ACTIVATOR
- National Stock Number: 6750-00F002814
Product Identification
Product ID:MCP-788 PERMAGRAPHIC ACTIVATOR
MSDS Date:04/01/1987
FSC:6750
NIIN:00F002814
MSDS Number: BBLTL
Responsible Party
RIDGEFIELD PARK, NJ 07660-5000
US
Emergency Phone: 212-971-0260/201-440-2500
Info Phone: 201-440-2500/212-971-0260
Cage: EO426
Contractor
Telephone: 201-440-2500/212-971-0260
Cage: EO426
Ingredients
SODIUM HYDROXIDE, CAUSTIC SODA, LYE *97-2*
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: 1-5%
OSHA PEL 2 MG/CUM
ACGIH TLV: 2 MG/CUM CEILING
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
SODIUM SULFITE
CAS: 7757-83-7
RTECS: WE2150000
Fraction By Weight: 1-5%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: MAY CAUSE SEVERE IRRITATION
& BURNING. INGESTION: MAY CAUSE SEVERE IRRITATION/BURNING OF MUCOUS
MEMBRANES/DIGESTIVE TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION & BURNS.
First Aid
First Aid:EYES/SKIN: IMMEDIATELY FLUSH W/PLENTY OF RUNNING WATER FOR 15
MINS. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:FLUSH W/LARGE QUANTITIES OF WATER (AT LEAST
20:1 DILUTION) IF ACCEPTABLE TO LOCAL SEWER AUTHORITY. OTHERWISE,
APPLY A SUITABLE ABSORBENT MATERIAL & COLLECT INTO AN IMPERVIOUS
CONTAINER.
Handling
Handling and Storage Precautions:NO SPECIAL PRECAUTIONS REQUIRED.
WORKERS SHOULD ALWAYS WEAR THEIR SPECIAL PROTECTION EQUIPMENT.
Exposure Controls
Respiratory Protection:NO SPECIAL EQUIPMENT REQUIRED.
Ventilation:LOCAL EXHAUST: GOOD VENTILATION.
Protective Gloves:REQUIRED
Eye Protection:EYE SHIELDS
Other Protective Equipment:APRON
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Spec Gravity:1.077
pH:13.5
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR & COLORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:DISPOSE OF THROUGH A LICENSED CHEMICAL WASTE
DISPOSAL SERVICE IAW/FEDERAL, STATE & LOCAL REGULATIONS. CORROSIVE
LIQUID UN1760.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.